In this tutorial, I will show, how to config Reach RS receiver as RTK base. Before you begin this guide, you should have an active YouCORS account, and your base receiver should have internet access.


1. Mount point setup

Create a new mount point.

Select nearest to you caster and enter mount point name. Mount point should be unique. Then click save button. 

Now we need to set a password to enable incoming NTRIP connection from GPS base. Click to Data source tab and enter a new password.


Mount point is ready.

2. Reach RS setup.

Open Reach view app and select Base mode section.


Enter casters address, port. You can find this info at app.youcors.com/casters

Aslo you need enter mount point name and Ntrip password.

Then press Apply button. 

Reach will connect to YouCORS automatically and start broadcast data.